Manufacturers Support Sites

  Manufacturers Support Sites

  Get complete support by clicking on the below listed links

Will open new page

 

 

DELORME GPS                    

MAGELLAN                           

MAGELLAN i-board               

MICROSURVEY                      

NIKON i-board                        

PENTAX                                    

PRECISION SURVEY             

SOKKIA i-board                      

SURVEYORS TOOL KIT        

TDS DATA COLLECTORS   

TOPCON i-board                    

 

 

Stakemill adds Omni Robotics Prisms and Prism Clusters

Now available at www.stakemill.com

360° Prism Cluster (8 prisms) Surveyor

OMNI #8000 360° Prism Cluster (8 prisms)

 

OMNI #1500 0mm 9 Prism Assembly (stationary).

• Anodized aluminum holder for rugged use
• Includes 62mm Prisms
• Longer Range than Mini Prisms
• Popular M20 Thread size
• 5/8 Bayonet Adapter
• Great for Moving Applications – Quad – Marine – Helicopter
• Prism canisters are hermetically sealed with a special sealing resin process to ensure that canisters remain sealed in the most adverse conditions

Order before Dec 31, 2008 and get a free prism pole and bi-pod

1500 Series is available only in 0mm offset.

Series #1100 prism used with all assemblies
• Holders are durable aluminum.
• Stainless steel hardware.
• Bayonet adapter (5/8-11 female thread) for ease in mounting.
• Pre-loaded friction lock. No screws. 

Leica Style Robotic 360º Prism Assembly 34000

Omni Robotics Prism

Stakemill – Kuker Rankin 5 – 7 Inch Hand Level 2X Stadia 570S

Stakemill now offers Kuker Rankin hand levels

 

Kuker Rankin 5 – 7 Inch Hand Level 2X Stadia 570S

 

Kuker Rankin 5 – 7 Inch Hand Level

2 Power Stadia hand level with very sharp filed of view and a stadia ratio of 1:20.  The exterior has a black powder coating finish.

570S

 

Kuker Rankin 7 – 10 Inch Hand Level 2X Stadia 710

 

Kuker Rankin 7 - 10 Inch Hand Level

2 Power Stadia hand level with very sharp filed of view and a stadia ratio of 1:20.  The exterior has a black powder coating finish

 

Kuker Rankin 5 – 7 Inch Hand Level 2X Stadia 572S

 

Kuker Rankin 5 – 7 Inch Hand Level

2 Power Stadia hand level with very sharp filed of view and a stadia ratio of 1:32.  The exterior has a highly visable powder coating finish.

572S

Pole Bracket Kit Trimble® GPS Pathfinder® ProXRT Receiver

Pole Bracket Kit Trimble® GPS Pathfinder® ProXRT Receiver

This pole bracket kit holds the Trimble® GPS Pathfinder® ProXRT receiver securely to any SECO rover rod, or other standard rods.*

This kit allows the ProXRT to attach to a survey rover rod to take advantage of the maximum accuracy of the ProXRT.

It is easy to attach and adjust the height on the rover rod.

It comes with two pole clamps, one clip and two screws and the ProXRT is pre-drilled for the extra clip.

The pole clamps are made of machined anodized aluminum with stainless steel clamp screws and fit rover rods with 3/4 in (1.90 cm) to 1-1/4 in (3.17 cm) diameters.

This kit weighs only 0.40 lb (0.18 kg)

 

SECO Incite Universal Tilting Prism Assembly 2050-YLB

Incite Universal Tilting Prism Assembly

The accuracy of the 58 mm prism is <5 arc sec and is silver coated to protect against moisture, fogging and severe climatic conditions. >The #2050 prism canister, holder, yoke and locking target assembly are manufactured in the United States and have a limited lifetime warranty.

The rugged Polypropylene prism canister with brass M20 thread is highly impact resistant .The dual sided targets have -30 mm and 0 mm offsets.

The target and yoke assembly are precision manufactured from high quality aluminum, stainless steel and brass.

It has an easy to use twist knob tilting target lock.

This assembly fits standard 5/8 x 11 prism poles, adapters, etc.

It is available in three high visibility powder coated colors: yellow, fluorescent orange, and fluorescent yellow.

The height of the tilting axis is 115 mm.

Weighs 1.5 lb (0.68 kg)

 

Stakemill delivers Survey Stakes to Ft Myers, Naples, Bonita Springs and Pt Charlotte customers

JUNE 2008 - The Recent closing of Gulf Coast Survey Supply leaves Ft Myers customers out in the cold once again.  From late 2003, mid 2004 and again in late 2007 Ft Myers supplied surveyors and contractors received different quality stakes from Gulf Coast during those time periods.  Those time periods also overlap when two other large stake producers went bust and most recently when thier fourth and final supplier was unable to provide for them due to poor performance.  We can’t empahise enough to land surveyors, road builders and contractors that need wood stakes, be sure to check out your suppliers in house manufacturing abilities. 

STAKEMILL DELIVERS TO FT MYERS AREA EVERY OTHER WEDNESDAY – delivery charges apply

Stakemill adds more Ft Myers, Naples, Bonita Springs & Pt Charlotte customers (Jan 2008 Blog by Stakemill)

Once more Ft Myers surveyors are in need of a reliable stake supplier.  The Ft Myers supplier has left surveyors in the surrounding areas in 2003 when Delray pulled out and then a second time in 2004 when Component Systems pulled out.  This Ft Myers supplier has actually hurt it’s customers by never fully understanding they were never more than a reseller with no adequate supplier.  They most likely never even toured the facilities operations that supplied them with their wood stakes giving them the knowledge of what was involved in stake production.

We welcome these new customers and want to reiterate the fact the Ft Myers supplier has told the surveyors they formerly delivered.  With todays fuel prices, cost of delivery vehicles, fuel economy of said trucks and human resources to deliver the stakes, it will actually cost us more to service the area.  We will do everything we can to deliver to the Ft Myers area at competitive prices with a quality wood survey stake as we have for the last 20 years.

See our complete line of survey lath, 1×2 stakes and hubs, iron rods, concrete monuments and field supplies at Stakemill.com.