Download Spectra Precision Survey Pro Software Before You Buy

http://www.spectraprecision.com/spectra-precision-software-downloads.aspx

Downloads GNSS/GPS Downloads EPOCH 50 EPOCH 35 EPOCH 25 – v232 Field/Office Software Downloads Survey Pro Survey Office Foresight Other Downloads NEW! Spectra Precision Field Surveyor 2.1.1 GPS configurator SP – v3525

FCC Narrowbanding Requirements for UHF Transmission in the US

Most UHF radio licenses in the US are for the 450-470 MHz band. In the past the FCC divided this 20 MHz band into 800, 25 kHz-wide channels in order to allow each user to operate with his own licensed frequency. Federal frequency coordinators have allocated these 800 channels to users in various geographic regions around the country. As UHF usage increased, some regions ran out of channels. Accordingly, in 1995 the FCC announced a three-phase plan to double the number of channels to 1600 by licensing operation in narrower, 12.5 kHz channels. The three phases are:

Phase I: Restrictions on the certification of new radios

Phase II: Restrictions on new licenses

Phase III: Restrictions on all licenses

The FCC implemented

Phase I in 1997 when they began certifying radios only if they were capable of operating in 12.5 kHz or narrower channels, or with spectral efficiency equivalent to 4800 bps in a 6.25 kHz channel. This “spectral efficiency” clause means a radio can operate in a 25 kHz channel if it transmits at least 19200 bps. All Pacific Crest radios certified since 1997 have met this narrowbanding definition: they either operate in 12.5 kHz channels or they transmit 19200 bps in a 25 kHz channel. Some can do both.

On 1/1/11, the FCC implemented Phase II of the narrowbanding plan and started issuing new 25 kHz licenses only in rural areas or for special purposes. These licenses were rare. When 25 kHz licenses came up for renewal, they were almost always replaced with 12.5 kHz licenses. Pacific Crest believes it is prudent to assume that the FCC will not grant any 25 kHz licenses after 1/1/11. But if you do get a 25 kHz license, it will require you to transmit at least 19200 bits per second. 

On 1/1/13, the FCC will implement Phase III of the narrowbanding license plan and require all users to transmit in 12.5 kHz channels at any speed or in 25 kHz channels at 19200 bps. Transmitting more slowly than 19200 bps in a 25 kHz channel will be illegal in the US. Furthermore, we expect that licenses for 25 kHz / 19200 bps operations will be very rare, if there are any at all. Unless you are a very special case, you should expect to be restricted to 12.5 kHz channels when any of the following occurs: you get a new license, your existing license is renewed or 2012 ends.

 

Here are answers to some common questions specific to Pacific Crest radios:

Q: I have a 25 kHz PDL radio. Is it 25 kHz only?

A: Yes. Only ADL-generation radios are user-configurable for operation at both 12.5 and 25 kHz. You can continue to use 25 kHz HPBs, LPBs, EDLs, RFMs, etc. until your license expires. However, you probably will not be able to renew your 25 kHz license and so will have to stop using your 25 kHz radio.

Q: I have a 25 kHz PDL radio. Can I legally use it after 1/1/13?

A: Only if you have a license after 1/1/13 for this mode of operation. These licenses will be hard to get and you will be restricted to a radio link rate of 19200 bps.

Q: How can I tell if my PDL radio transmits in 12.5 kHz or 25 kHz channels?

A: For LPBs, Sitecoms and EDLs, look at the model number on the side of the radio. If it ends in “12″ it’s a 12.5 kHz model. If it ends in “25″ it’s a 25 kHz model. For HPBs, look at the part number on the label. The following are 25 kHz HPB part numbers:

• A02531
• A02533
• A02535
• 56651-42-00
• 56651-44-00
• 56651-46-00
• 56651-44-10
• 56651-46-03

All other HPB part numbers are 12.5 kHz models. You can also connect your PDL radios to PDLCONF configuration software. The channel bandwidth is displayed on the Identification screen.

Q: All of my radios are receivers. How does any of this affect me?

A: It doesn’t directly affect you because the new regulations only restrict transmission. However, if you use a 25 kHz radio to receive data from a 12.5 kHz transmitter, you will pick up the desired signal but you also will receive signal from any radio within range that is transmitting on an adjacent 12.5 kHz channel. The mixing of the two signals will make both unintelligible. In practice, using a 25 kHz radio to receive a 12.5 kHz transmission doesn’t work well.

Q: Will I be able to continue using an ADL radio after 1/1/13 even though it is capable of transmitting in a 25 kHz channel?

A: Yes. Even if the FCC decides to forbid use of a radio that is physically capable of transmitting in a 25 kHz channel (not likely), Pacific Crest will release a version of firmware that will prevent such transmissions. The bottom line is that your ADL radio will remain legal even according to the most conservative interpretation of the FCC policy for 1/1/13.

Q: How fast can I operate in 12.5 kHz channels?

A: : This depends on the protocol and modulation type you select. The following table shows what link rates are supported by various combinations of protocol and modulation types:

Protocol Type	Modulation Type	Radio Link Rates (bps)
Transparent FST	4FSK	9600
Transparent EOT/EOC and Packet Switched	GMSK	4800
Transparent EOT/EOC and Packet Switched	4FSK	9600
TRIMTALK 450s	GMSK	4800, 8000
TRIMMARK II/IIe	GMSK	4800
TT450S (HW)	GMSK	4800
TRIMMARK 3	GMSK	9600 (USA)

Q: How does the narrowbanding policy affect my GPS receiver?

A: If your GPS receiver includes an internal UHF radio transmitter, the same FCC rules apply to it as to stand-alone transmitters: no more licenses after 1/1/11 and no more use (probably) after 1/1/13. To see what type of radio you have, use the receiver’s radio configuration software to connect to the radio. The channel bandwidth is usually displayed on an identification screen. If your GPS receiver’s internal radio only receives, there is no effect as the FCC’s narrowbanding policies affect only transmitters.

Q: My 25 kHz radio can transmit data at 19200 bps. This is the “equivalent efficiency” of 4800 bps in a 6.25 kHz channel, which satisfies the FCC’s narrowbanding requirement. So why do I need to switch to 12.5 kHz radios?

A: It is true that the FCC has defined narrowbanding as operating in 12.5 kHz or narrow channels OR transmitting at least 19200 bps in a 25 kHz channel. But that doesn’t mean they will automatically license any 25 kHz operation. In fact most observers believe they will NOT issue any more 25 kHz licenses except in special cases. The FCC has always been clear that their goal is to allow more licenses to be granted. The only way to do this in a limited frequency band is to require narrower channel bandwidths. Therefore, Pacific Crest believes it is prudent to switch to 12.5 kHz-compatible radios on or before the expiration of your 25 kHz license.

Q: Will there be a Phase IV – a requirement to use only 6.25 kHz channels?

A: Perhaps, but the FCC has issued no statements on this. Note that the FCC continued to license 25 kHz operation for 16 years after they announced the plan to migrate to 12.5 kHz. Will they issue only 6.25 kHz licenses beginning 16 years from today? Time will tell. You can be sure, however, that if this day ever comes, we’ll have a radio waiting.

Reproduced from Pacific Crest FCC Narrowband Requirements 022012.pdf document

Magellan Ashtech MobileMapper 6 Final Inventory

MobileMapper 6

As Stakemill nears the end of our MobileMapper 6 inventory we are saying goodbye to a thousand dollar sub meter unit.  While others claim to have hand held units to take the place of the MM6, no one has yet stepped up tot the plate with a true thousand dollar unit as rugged as the MM6, with free upgrades like the MM6 and the ability to create shape file as the Magellan Mobile Mapper did so well and for so long.  We do have a new Ashtech MobileMapper 10 that retails fro $1495.

ProMark 800 Now Demoing at Stakemill Multi-Constellation & Multi-Frequency

Ashtech ProMark 800

For pricing click here - For specifications and details click here

ProMark 800 Now Demoing at Stakemill Multi-Constellation and Multi-Frequency

Spectra Precision Ashtech ProMark 800

Stakemill has taken delivery of the new Spectra Precision version of Ashtech’s ProMark 800, replacement GNSS Receiver for the Ashtech/Magellan ProMark 500. 

More ProMarks than anyone

What a great way to bring in 2012, the new Spectra ProMark 800 units have a gray body color and the same tried and true accessories that previous ProMark 500 users are familiar with.  We will be dialing into the eGPS network to let this triple frequency and multi constellation unit do what it does best, lock onto satellites. We are excited to see it lock onto satellites in any order and expect its fix time to be the fastest ever. For those users of other brand GNSS Receivers, never again will you have to wait for an L1 solution before unit will start using another constellation.  The new ProMark 800 will track any satellite regardless of constellation and acquire its fix unlike the other brands in no particular order.  Stop in and see first hand the L5 and GALILEO options at work.

Just Arrived - December 30, 2011 - ProMark800

Multi-frequency & multi-constellation GNSS receiverThe ProMark 800 rover and rover/base system, with its 120 channels, offer L1/L2/L5 GPS+GLONASS+GALILEO field-proven technologies for surveying and geodesy. This is a powerful RTK survey solution delivering precise GNSS positioning in a smart, rugged, cable-free and flexible design.

Advanced Z-Blade Technology
The new Z-Blade GNSS Centric technology optimally uses GNSS signals and takes advantage of each GNSS constellation to deliver fast and stable RTK positions, even when GPS coverage is insufficient, like in dense urban canyons or heavy tree canopy. Not like all GNSS receivers which prioritize GPS satellite signals over signals from other constellations, ProMark 800 with Z-Blade is no longer GPS dependent (requiring a minimum of 4 to 5 GPS satellites) to acquire and maintain precise positioning. Z-Blade GNSS Centric algorithm treats equally all available satellite signals and then combines them for optimal performance. 

• Fully independent GNSS satellites tracking and processing
• Fully independent code and phase measurements
• Quick signal detection engines for fast acquisition and re-acquisition of GNSS signals
• Advanced multi-path mitigation
• Use of SBAS and GLONASS ranging signals to strengthen the GPS solution
• Extended solution reliability in urban canyon and under tree canopy

The mix of exceptional RTK performance and compact design makes the ProMark 800 an extremely powerful and appealing RTK solution for demanding professional land surveyors. Waterproof, shock resistant, cable free, light-weight, and with long battery life, the ProMark 800 offers all-day operations in any environmental conditions.

All-in-one Flexibility
ProMark 800 includes extended wireless network communications modules, for maximum mobility and flexibility in the field. An RTC bridge function enables a network-connected ProMark 800 rover to rebroadcast RTK corrections to multiple rovers.

• UHF and GSM/GPRS/3.5G built-in communication modules
• Multiple operating modes and configurations
• Extended support of protocols and data formats

Feature-rich Surveying Solution
ProMark 800 offer includes field and office software as well as data collectors choice to ensure you get a robust, ready-to-use, cable free RTK rover solution.

• FAST Survey field software simplifies data collection and real-time operation.
• GNSS Solutions office software provides powerful support to a wide range of applications.
• Real Time Data Server Software (RTDS) is a software offering land surveying companies the possibility of using GNSS equipment to build their own Direct IP RTK corrections server.

Pacific Crest ADL Vantage Radios at Stakemill

Order Here

ADL Vantage Pro

ADL Vantage Pro is an advanced, high speed, wireless data link built to survive the rigors of GNSS/RTK surveying and precise positioning. This sophisticated 35 Watt radio utilizes Pacific Crest’s latest generation Advanced Data Link (ADL) technology while remaining backward compatible with existing Pacific Crest, Trimble and other radios.  ADL Vantage Pro’s full-function user interface streamlines field configuration and troubleshooting so you can maintain maximum productivity. Its 35 Watts of power and advanced radio protocols offer the maximum range and throughput. For the most rugged and reliable digital data link, go with the Geomatics industry’s new standard in high-power wireless communications – ADL Vantage Pro.

 

Key Features

• Configurable Transmit Power from 2 to 35 Watts
• Multi-function user interface
• Heavy-Duty Construction
• Fully water- and dustproof
• 19200 Over-the-Air Link Rate without range degradation
• Advanced 40 MHz Bandwidth
• Software-Derived Channel Bandwidth

 ADL Vantage Pro Datasheet (English)  (Portuguese)

 ADL Vantage Pro FAQs (English)

 ADL Vantage/ADL Vantage Pro Getting Started Guide (English)

 ADL Vantage/ADL Vantage Pro User Guide (English)  (Portuguese)

 ADLCONF User Guide  (English)

NEW Orange TruPulse Laser Range Finders for Juniper Users

Order here

Orange TruPulse Range Finders

Stakemill has the Laser Technology TruPulse Range Finders in Orange to match the Archer and Mesa.  Stakemill has more hardware and software choices when it comes to the TruPulse units than any other supplier in Florida, Measureably Superior has joined Florida Superior in providing mapping solutions.

New ProMark 100, ProMark 200 Service Layer V 1.5.3 December 2011

Firmware Release Notes
Date: December 1st, 2011
Product: GNSS Service Layer for ProMark 100/200
Subject: New GNSS Service Layer release
Number: v1.5.3
Introduction
This release is a new version of GNSS Service Layer. It is an update of the latest version of Service Layer v1.5.2.
Service Layer v1.5.3 firmware is compatible with the following devices:

•  ProMark 100

•  ProMark 200

Components
New components are in bold
Release Version                 Version              GNSS
Previous version           V1.5.2                          W091                 Ht23
New version                V 1.5.3                        W092               Hv23

Upgrading instructions
To install new GNSS Service Layer on your device, you must establish a Microsoft ActiveSync connection between your PC and the GNSS receiver, copy the GNSS ServiceLayer v1.5.3 CAB file and execute it on the GNSS device. Then follow the instructions.
Languages supported
The following languages are supported with the version 1.5.3:

•  Chinese Simplified
•  Chinese Traditional
•  Japanese
•  Korean
•  English
•  French

•  German
•  Greek
•  Italian
•  Portuguese
•  Spanish

New features/Enhancements
This new GNSS Service Layer provides support to the following improvements:

•  Coordinate transformation messages support for MT 1021 – 1023
•  ProMark 800 receiver parameters added to receiver database

Resolved problems/Improvements
N/A

Recommendations
If your GNSS receiver is updated with the Service Layer v1.5.3, and you are using ProMark Field application, make sure that it is updated to v2.0 or further version.

Limited Time Offer MobileMapper External Antenna, Clamp and Cradle Upgrade from Stakemill

CYBER MONDAY WEEK LONG SALE

ORDER NOW AT 20% OFF MSRP FOR A LIMITED TIME

When you are ready to add an external antenna to your MobileMapper 100 we have a OEM package already designed for you.  Includes the OEM Ashtech 660 single frequency antenna along with the OEM cable to connect your MM100 to the 660 antenna and a OEM pole clamp that holds the MM100 to either a tripod or GPS Rover pole. LIMITED TIME OFFER

Ashtech MobileMapper 100 External Antenna - Pole Clamp

TDS Spectra Survey Pro on Ashtech MobileMappers

Stakemill has the first release of the New Spectra Survey Pro 5 on Ashtech Mobile Mappers in stock.  While others claim they have more, simply stop into our store and look at the volume of units we stock and then look at their units.  We have more “On Display” or “CORS” GPS units then they do inventory.  We are also proud to inform you we have more local surveyors converting to Ashtech GIS and GPS receivers then the other companies have converting.  Our partnering with the worlds largest RTK network and the worlds most competitively priced units and a team of helpful members has helped us excel in this ever-growing market.  Stop in and see a demo of Flying RTK, Real Time rovers or even a Castor demo so you can run your own RTK network.  We have the products you need.

http://www.spectraprecision.com/survey-pro-downloads.aspx

Stakemill

Ashtech MobileMapper 10 Factory Reset Procedure

Thanks to Joe S for this helpful hint.

This will erase any data and all unlock codes so be prepared te reinstall software and have your product key codes.

1. Power unit down fully: Push and hold the ON/OFF button, display shows “Power will be turn off and your data may be lost if not saved. Do you want to continue? Yes; No”, than accept “Yes” by pressing the Enter button. The MM10 will fully power down.

2. With MM10 unit OFF, push and hold the top two center buttons. The will either be labeled ‘F2′ and ‘F3′ OR they will be labeled ‘-’ and ‘-’:

While holding both these buttons down, press the “ON/OFF” button.

3. The MM10 will boot and this screen will be displayed:

Click on the Up-Arrow Key to restore your unit! Any other key aborts this process.

4. Wait four-minutes while the progress bar moves to the right:

5. The receiver will than reboot. DO NOT PUSH ANY BUTTONS, or click on the screen. After 3-4 minutes the MobileMapper 10 will turn OFF automatically.

6. After the MobileMapper powers down, click the ON/OFF button for a short-key-press, the unit will power on again.

7. Fully power down unit: Push and hold the ON/OFF button, display shows “Power will be turn off and your data may be lost if not saved. Do you want to continue? Yes; No”, then accept “Yes” by pressing the Enter button. The MM10 will fully power down.

8. After the unit boots, you will see this screen:

Click on the screen.

9. Follow the onscreen instructions to recalibrate the touch screen.

10. Reload all software from ftp.ashtech.com or from your factory CD-Roms

May work on some Champion models

Lower Prices on Ashtech MobileMapper RTK Rovers at STAKEMILL

Shop here

With the new Flying RTK option we now have lower prices on our MobileMapper RTK Rovers, One Thousand Dollars Lower.  The new Flying RTK option which is exclusive to Ashtech is sure to make RTK network more feasible to mapping grade users.  With the free DOT and reduced price DGPS service from our prefered vendor eGPS.net we now have a variety of choice for end users.  No other GPS manufacturer has the RTK options like we do.  None of the low-cost Chinese suppliers have the support staff and engineers capable of developing this making the Ashtech units by far the best value in GIS and GPS instruments.

STAKEMILL now taking orders for Spectra Survey Pro 5.0 Ashtech ProMark 200 Edition

Order Survey Pro 5.0 for your Ashtech ProMark 200 here

Spectra Precision Survey Pro 5.0 Field Software

Spectra Precision Survey Pro field software provides surveyors with a complete set of capabilities for a wide variety of survey and construction projects. With the release of Survey Pro version 5.0, the software includes a wide range of new powerful features that will be made available as a purchasable upgrade to existing Survey Pro users.

Key new features include:
•Data Management Control – Flexibility in data collection with the ability to edit survey data and fix entry errors or immediately update coordinates. Change a rod height and see the change cascade through the file with the enhanced dynamic file viewer/editor.

•Active DXF - Support for staking activities with DXF files to enable data flow from the design software to field crews, which improves efficiency on the road or construction site. Survey Pro, supported by touch screen data collectors, can actively control the DXF file by allowing selection of engineering objects and creation of new objects with DXF background files, allowing instant design changes on the fly.

•Optimized Workflow – A user customizable home screen enabling the user to configure a favorite choice of field processes to expedite the daily workflow. Easily switch between field processes by selecting the home screen and choosing the next action. Also use the graphical Active Survey map screen to speed activities; for example, tap and hold to create new points, then select points and switch to a graphical stakeout screen to complete the task.

•Updated Feature Codes – Expanded support for high-precision GIS data collection applications. Users can perform auto linework commands as well as edit and draw lines in real time for staking or COGO.

•FXL File Support for Feature Codes and Attributes – Users can customize, import and export to Spectra Precision Survey Office software and other FXL-enabled products.

Survey Pro field software is offered in modules so surveyors can begin with one module and easily add features as they need them. Advanced modules can be easily and remotely installed via electronic upgrades. In addition, Survey Pro software is available in multiple languages and on a variety of data collector platforms.

Survey Pro is currently utilized by more than 40,000 customers worldwide, providing them with reliable and easy to use data collection, computation and field staking. The premiere Survey Pro software solution runs on all the Spectra Precision Ranger® 3, Nomad™ and ProMark data collector models.

MobileMapper 100 Flying RTK Option

Stakemill now offers Flying RTK capable of  Decimeter accuracy for the Ashtech MobileMapper 100.  Order it online at Stakemill.com

Thanks to BLADE, Ashtech has created a so called Flying RTK solution that enables improving the Float RTK performance of Ashtech receivers. BLADE improves standard Float RTK performance as it dramatically reduces the time of convergence, it enables Ashtech solution to reach the decimeter accuracy level quicker at a lower cost than competing systems.

Magellan ProMark3 USB to Serial RS-232 Adapter

Verified to work with the ProMark 3 I/O module

IOGEAR 

USB to Serial RS-232 Adapter

USB to Serial RS-232 Adapter

 

The USB to Serial RS-232 Adapter provides one RS-232 Serial (DB-9 male) connector via one standard USB port at a data transfer rate of up to 230Kbps. You can instantly enjoy connectivity with modem, PDA, POS, or other serial devices on your PC or Mac without the hassle of opening your computer case. It provides a quick, simple, and cost-effective solution and is ideal for various communication and automation applications. This makes the USB interface transparent to serial peripherals, allowing them to easily interface with USB computers and eliminates the setup hassle found with traditional serial port connections. This device also supports energy saving suspend and resume operations.

ASHTECH ProMark 200 RTN Network Rover from Stakemill

ASHTECH ProMark 200 GNSS Network Rover

Ashtech Introduces ProMark 200, Cost-Effective, Dual-Frequency RTK Rover

All-in-one, Dual-Frequency Network RTK Solution

Nantes, France, September 15^th, 2010 – Ashtech® today introduces the ProMark™ 200, a cost-effective dual-frequency (L1/L2)  network RTK rover solution. The ProMark 200 offers long-range RTK performance, fast initialization time and centimeter level accuracy in a lightweight and rugged compact design. Together with the comprehensive Ashtech FAST Survey™ field software, the ProMark 200 meets the demanding expectations from professional land surveyors. Additionally the ProMark 200 solution can be conveniently used as a handheld receiver, without any external antenna, for easy pre-surveys and GIS data collection.

ProMark 200 survey receiver is part of the new generation of Ashtech GNSS solutions; it complements the well-known ProMark family that currently includes ProMark 3, ProMark3 RTK and ProMark 500 GNSS survey receivers.

ProMark 200 is the most cost-effective dual-frequency network RTK solution from Ashtech. Embedded BLADE™ technology provides long-range RTK performance, fast initialization and centimeter-level accuracy.  Thanks to its dual-frequency capabilities, the typical on-the-fly RTK initialization time is below minutes with a range up to 40 km, with a typical RTK accuracy of 1 cm + 1 ppm. It is compatible with all types of RTK networks (VRS, FKP and MAC) and can be upgraded to the up to 20 Hz real-time raw data and position output.

The ProMark 200 network RTK rover has been designed for maximum mobility and efficiency in the field. It is a rugged, waterproof and lightweight receiver: it weighs about 1 kg (2 lb) including the handheld receiver and the external antenna. It comes with large memory (2 GB internal NAND Flash and unlimited external SDHC cards support), all-day-long autonomy (over 8 hours with GNSS activated), and extended wireless communications (GPRS, Bluetooth, Wi-Fi). The mix of exceptional RTK performance and compact design makes the ProMark 200 an extremely powerful and appealing network RTK rover solution.

ProMark 200 is a very cost-effective offering meeting the most demanding requirements for a high-end survey solution. Its FAST Survey field software includes topographic features typically associated with dual-frequency, extensive data formats and local coordinate system support. Added options enable the ProMark 200 to seamlessly work with a wide range of survey instruments to run complete survey jobs, including site calibration, stake out, and survey projects where total stations are used.

INTRODUCING SURVEYOR FRIENDLY GIS

INTRODUCING “SURVEYOR FRIENDLY GIS”

Stakemill is the first to offer a Land Surveyor friendly GIS system surveyors are already familiar with, we have the newest software solutions along with the latest GIS units paired up to offer coordinate solutions to allow land surveyors something they are already familiar with in the ever-growing market.  Contact one of Stakemills factory hardware trained and software trained techs to help you choose the right measuring system for your budget.

Evolution of Ashtech Mobile Mapping

Just a quick note about the name changes – Ashtech Solutions became Thales Navigation which became Magellan Professional and changed back to Ashtech which has recently been purchased by Trimble to be distributed under the name Spectra Precision as Ashtech.  It is still the same high quality GPS, just a few name changes.

Ashtech name changes

Ashtech FAST Survey Video of receivers available from Stakemill

STAKEMILL has prepared a group of videos for you to learn more about the Ashtech GPS lineup offered for sale online at www.stakemill.com

MOBILEMAPPER 100

PROMARK SERIES

FAST SURVEY

Order online at www.stakemill.com

Spectra Precision Introduces Ashtech MobileMapper 10

LOWEST PRICE MM10

Thursday, May 26th 2011

Spectra Precision | Westminster, Colo.

Read More About: ashtech, mobilemapper, spectra, trimble

Spectra Precision Introduces Ashtech MobileMapper 10 Cost-effective, Meter-Accurate Mobile GIS Solution

– Spectra Precision introduced today the Ashtech MobileMapper® 10, the latest addition to its new line of GIS/GNSS smart data collectors. The MobileMapper 10 is a lightweight, low power and cost-effective mapping solution with real-time meter level accuracy. “The MobileMapper 10 is affordable with its real-time meter and post-processed half-meter accuracy making it a cost to performance leader for mobile mapping solutions,” said François Erceau, general manager of the Spectra Precision, Nikon and Ashtech Business.

Geographical Information System (GIS) and location-based services are being utilized by a wide range of organizations and data collection applications. “The growing need for geo-localization is naturally boosting the demand for affordable yet accurate data collection solutions,” said Erceau. “Since the 2003 introduction of the first MobileMapper, the Ashtech brand has been a leader in providing GNSS solutions to enable wider access to professional mapping.

The MobileMapper 10’s accuracy, ease-of-use and affordable price continue this tradition,” he added. Boost Mapping Productivity With the MobileMapper 10, organizations can improve the quality of their GIS data, improve productivity and reduce operating costs. MobileMapper 10’s user-friendly efficiency enables virtually any operator to quickly learn and use the new mobile mapping solution. With quick logging operations for productive mapping and meter-level accuracy, the solution can improve the features and attributes for geo-positioning. In addition, the MobileMapper 10’s connectivity allows data communication between the field and the office. Unpack and Start Logging MobileMapper 10 is a complete mapping solution ready for real-time data collection. The MobileMapper software suite includes features that GIS professionals need without the burden of complicated and rarely used functions, both in the field and the office. It is intuitive and requires minimum training. MobileMapper Field application software is an ideal solution for GIS data collection, asset management, area measurements, maps creation and updates. It also provides a direct interface to external sensors such as cable locators and laser range finders for a complete field solution. Designed for the Mobile GIS Workforce

The MobileMapper 10 incorporates Bluetooth®, WiFi and GSM/GPRS communication to keep field and office workers connected for increased efficiency. It is a convenient tool for intensive data collection. According to Erceau, “the MobileMapper 10 is lighter (380g with battery) than competitive smart data collectors, offers a large display in a compact form factor and has exceptional battery life (typically > 20 hrs @ 20°C with GPS on).” The MobileMapper 10 runs the powerful Windows® Mobile 6.5, which offers the flexibility required to support a variety of GIS/mapping applications. Availability The MobileMapper 10 is expected to be available worldwide in June 2011 through authorized Ashtech Mapping & GIS distributors.

For more information, visit: http://www.ashtech.com. About the Ashtech Brand Recognized as an industry leading brand, Ashtech has been developing GNSS technology for more than 25 years. Ashtech is the creator of BLADE technology, which is a unique method for using multiple GNSS constellations for high-accuracy positioning. Ashtech also introduced the MobileMapper series of products for GIS and mapping, as well as the ProFlex™ 500 and ProMark™ series, including the ProMark 500, ProMark 200 and ProMark 100, a well-recognized GNSS land survey product line currently on the market.

Following the recent acquisition of Ashtech by Trimble, the Ashtech teams, GNSS solutions portfolio and distribution networks are now part of the Spectra Precision Business. The Ashtech brand has a worldwide presence and is located in Carquefou, France, with offices in Beijing, China, and Singapore, as well as affiliates in Santa Clara, Calif. and Moscow.

For more information on Ashtech, visit: http://www.ashtech.com. About the Spectra Precision Brand Spectra Precision has long been an established brand, known for delivering quality products to the construction market. Focusing on the specific needs of the conventional surveying market, the Spectra Precision brand offers a complete product portfolio including Global Navigation Satellite Systems (GNSS), Global Positioning Systems (GPS), optical total stations, data collection hardware, field and office software, as well as a wide range of construction tools. Spectra Precision surveying equipment is an economical choice that utilizes technologies for optimal efficiency. With convenience and reliability as the foundation of the Spectra Precision brand, it is an ideal choice for value. The Spectra Precision brand is backed with the strong technical support that users have come to expect from a quality name in surveying and construction. 888-477-7516 (Toll free) Media Contacts: Claire Geffroy +33 228093919 Lea Ann McNabb 408-481-7808

Ashtech MobileMapper 10

THE NEW MOBILEMAPPER 10 LOWEST PRICES

Buy from Ashtech’s largest GIS Dealer- Stakemill Priced from $1195 – ask about trade ins

MobileMapper 10

Stakemill is the global leader of Ashtech MobileMapper units, simply look at the attached images.

MobileMapper 10

Stakemill is one of the few dealers to have the MobileMapper 10 before anyone else to perform beta testing.  We also have more Ashtech models in stock than most dealers sell all year. If you are interestd in a new Ashtech MobileMapper 10 contact us for the most productive GIS package.  See our website for complete details on the NEW Ashtech MobileMapper 10.

http://www.stakemill.com/pdf/brochures/ashtech/MobileMapper_10_Datasheet.pdf